|
R - RETARDER NOT FUNCTIONING
PROPERLY (Models With Output Retarder)
|
| Condition |
Probable
Causes |
Suggested
Remedies |
| Excessive
Retarder Response Time |
1.
Priority valve sticking. |
1.
Clean valve. |
| 2.
Pressure regulator valve sticking. |
2.
Clean valve. |
| 3.
Charging valve sticking. |
3.
Clean valve. |
| 4.
Air lines leaking or incorrect size. |
4.
Replace air line. |
| 5.
Clutch piston seals leaking. |
5.
Replace seals. |
| 6.
Accumulator piston seals leaking. |
6.
Replace seals. |
| No
Retarder Operation at Low Speed |
7.
No air supply. |
7.
Check and repair air supply. |
| 8.
Regulator charging valve sticking. |
8.
Clean or replace valve. |
| 9.
Pressure regulator valve sticking. |
9.
Clean valve. |
| 10.
Charging valve sticking. |
10.
Clean valve. |
| 11.
Check valve malfunctioning, omitted, or installed backwards. |
11.
Replace or install check valve correctly. |
| 12.
Clutch piston seals leaking. |
12.
Replace seals. |
| 13.
Retarder clutch worn. |
13.
Replace clutch. |
| No
Retarder Operation at High Speed |
14.
Air supply too low. |
14.
Check air supply, correct as necessary. |
| 15.
Air line to retarder control valve ruptured. |
15.
Replace air line. |
| 16.
Air control defective. |
16.
Repair or replace control. |
| 17.
Retarder control valve sticking. |
17.
Clean or replace valve. |
| Low
Main and/or Retarder Pressure |
18.
Charging valve sticking. |
18.
Clean or replace valve. |
| 19.
Pressure regulator valve sticking. |
19.
Clean or replace valve. |
| 20.
Rotor hub seals leaking. |
20.
Replace seals. |
| 21.
Accumulator piston seals leaking. |
21.
Replace seals. |
| 22.
Clutch piston seals leaking. |
22.
Replace seals. |
| No
Retarder Output |
23.
Throttle (fuel) interlock/wiring defective. |
23.
Repair interlock/wiring. (Refer to vehicle service manual.) |
| 24.
Master switch malfunction. |
24.
Repair master switch. (Refer to vehicle service manual.) |
| 25.
Air actuator piston sealrings damaged. |
25.
Repair air actuator piston sealrings, retarder valve body. |
| 26.
Retarder valve sticking. |
26.
Repair retarder valve body. |
| Harsh
Retarder Apply |
27.
Plug valve installed incorrectly. |
27.
Install valve so that dimple on valve is toward springs. |
| 28.
Pressure regulator valve spring incorrect of broken. |
28.
Replace spring. |
| Retarder
Will Not Release |
29.
Brake pedal assembly or manual apply valve malfunctioning. |
29.
Repair brake pedal assembly or manual apply valve. (Refer
to vehicle service manual.) |
| 30.
Air actuator piston sealrings damaged. |
30.
Repair air actuator piston sealrings retarder valve body. |
| 31.
Retarder valve sticking. |
31.
Repair retarder valve body. |