N - CLUTCH(ES) SLIPPING
- MT(B) 640/643/650/653*
|
| Condition |
Probable
Causes |
Suggested
Remedies |
| Slipping
in First and Reverse Ranges Only Slipping in second or
Third (MT 640, 643) or Third or Fourth (MT 650, 653)
Only |
1.
First clutch defective. |
1.
Overhaul clutch and replace piston seals. |
| 2.
Clutch for particular range defective. |
2.
Overhaul clutch and replace piston seals. |
| Slipping
in Fourth and Reverse Ranges Only |
3.
Fourth clutch defective. |
3.
Overhaul clutch and replace piston sealrings. |
| |
4.
Sealrings on center support hub worn or broken. |
4.
Replace sealrings. |
| Slipping
in Low Range Only (MT 650, 653) |
5.
Low clutch defective. |
5.
Overhaul clutch and replace piston sealrings. |
| Slipping
in All Forward Ranges |
6.
Centrifugal check valve stuck open (forward clutch). |
6.
Inspect check valve for contamination and proper operation. |
| 7.
Trimmer valve stuck (selected range.) |
7.
Overhaul trimmer valve. |
| 8.
Piston seal damaged. |
8.
Replace piston seals. |
| *
NOTE: If unit is modified for split shaft PTO, all external
circuitry must be removed before troubleshooting. |